Library
Find scientific articles by category, year, or keyword.
Abstract. An analysis was conducted on the global increase in demand for electrical energy and the prospects for electricity generation, particularly in the field of hydropower. The use of micro-hydropower plants (micro-HPPs) and the factors affecting the effi...
This article investigates the impact of various planting systems and densities on the leaf formation dynamics of sweet potato grown in open fields and under film mulch in Uzbekistan. The research results indicate that the film mulch cultivation system accelera...
This paper analyzes the flow behavior of gas – liquid mixtures in pipelines and reviews modern approaches to hydraulic calculations of two-phase flows. The main hydrodynamic and thermodynamic factors affecting the transportation of gas, oil, condensate, and wa...
Reliable prediction of channel bed deformation is essential for the hydraulic design, rehabilitation, and operation of irrigation canals with weakly cohesive beds. However, the presence of both suspended sediment and a small proportion of cohesive material com...
This study presents a comprehensive three-dimensional coupled numerical model for a solar-driven desalination device incorporating a capillary-structured porous membrane (CPM). The governing equations - encompassing conjugate heat transfer, capillary-driven ma...
This article presents the results of a comparative analysis of occupational safety culture in small enterprises of Uzbekistan across different sectors. The study was conducted in 2023 – 2025 in enterprises operating in Kashkadarya region within three sectors: ...
This article investigates the hydrological indicators of the Kamashi Reservoir and their impact on the meliorative condition of lands within its zone of influence. During the study, the reservoir water level, water storage volume, groundwater depth, and the so...
In tasks of identifying relationships between technological parameters of automated control objects, the capabilities of neural networks are used. One of the important problems considered in such identification tasks is the choice of the neural network archite...
This paper presents the theoretical framework and practical computational methods for estimating bed-load and suspended-load sediment transport rates in a trapezoidal open channel with asymmetric side slopes (m 1 ≠ m 2 ) on non-cohesive granular beds. Four cla...
This paper presents an improved numerical method for calculating water hammer in pressurized pipelines under conditions of flow discontinuity and volumetric cavitation. The physical nature of the water hammer phenomenon is analyzed, and the main factors affect...
In this article, the channel deformation processes in the Amu – Bukhara Machine Canal and the main factors causing them were identified through field investigations and hydraulic modeling. The research results showed that during the period from January to June...
This study investigates the dynamic adsorption of petroleum hydrocarbons in an organobentonite adsorption bed for the effective treatment of oil-contaminated water. Experimental investigations were carried out in a continuous-flow fixed-bed column system. The ...
Abstract. Cotton processing waste (husks and stalks) in Uzbekistan represents a significant renewable raw material for lignin production, the basis of thermo- and salt-resistant drilling fluid reagents. The choice of lignin extraction method affects its purity...
The article presents the results of practical work on the effective drilling of salt layers that form an aggressive environment and the qualitative reinforcement of well walls. The types, properties, and parameters of tommanage solutions used for geologically ...
This article mathematically models the stationary and unsteady behavior of fluid flow in channels with variable cross-sections. The study considers the problem of determining unsteady flow parameters based on the method of small disturbances, Gurevich – Haskin...
The article presents the results of a 3D geological model of the Sherkent oil and gas field, created using Schlumberger’s Petrel software. The Sherkent structure was prepared for exploratory drilling in 2007 based on the interpretation of 3D seismic survey dat...
The paper presents the results of studying the fracturing and reservoir properties of rocks based on well logging data. Standard well logging methods (WLM – acoustic, neutron - gamma, gamma - gamma density, electrical and induction logging) were used to determ...
This article presents the results of field experiments conducted during 2024 – 2025 to evaluate the effects of irrigation methods and mineral fertilization rates on the growth, development, and yield of winter wheat. The study compared sprinkler irrigation and...
This article analyzes the theoretical foundations, technological approaches, and practical effectiveness of using energy-efficient materials in construction processes. Enhancing energy efficiency, minimizing heat loss, lowering the operational costs of buildin...
The article analyzes issues related to improving the operational reliability of centrifugal pumps widely used in the mining industry. It has been established that the primary causes of failures in pumping equipment operating in hydrotransport systems are hydro...
1-20 / 185