108-113
7
08 Jun, 2026
TECHNICAL SCIENCES
This article discusses the solution to the problem of identifying complex hidden relationships between varieties by clustering using the DBSCAN algorithm, dividing the characteristics of soft wheat varieties into groups (reflecting the growth and development o...
106-112
13
08 Jun, 2026
TECHNICAL SCIENCES
Abstract. The article presents the content and features of the bubble method algorithm for ordering of elements of a one-dimensional array in ascending order, in which the process of elements ordering is performed by sequentially comparing every two adjacent a...
84-90
16
08 Jun, 2026
TECHNICAL SCIENCES
This article investigates the influence of the longitudinal distance between the bodies of a two-tier plow on its constructive and technological parameters, including metal consumption, dimensions, lifting capacity, and draft resistance. The analysis revealed ...
91-99
19
08 Jun, 2026
TECHNICAL SCIENCES
Abstract. Maintaining a stable microclimate in greenhouses is essential for their efficient operation. The demand for automated control systems in agriculture is steadily increasing. The main issue lies in the lack of fast, adaptive, and autonomous control, in...
100-105
11
08 Jun, 2026
TECHNICAL SCIENCES
This article provides a detailed analysis of fuzzy logic and fuzzy production rules, which play a significant role in artificial intelligence and expert systems. The author justifies the relevance of modeling fuzzy inference for decision-making processes based...
70-78
50
06 Jun, 2026
TECHNICAL SCIENCES
This article presents a newly developed method for theoretically calculating the annual power output of a stationary 810 kW grid-connected photovoltaic power plant located in the Kashkadarya region, known for its hot and dry climate. The results derived from t...
22-31
64
06 Jun, 2026
GEOLOGICAL AND MINERALOGICAL SCIENCES
Abstract. The geological and physical conditions of oil deposits and the results of the analysis of the current state of development of the Akd jar field are presented. Using the characteristics of oil displacement by water, the initial recoverable oil reserve...
14-21
49
06 Jun, 2026
GEOLOGICAL AND MINERALOGICAL SCIENCES
The results of the analysis of perforation works in productive horizons are presented. It was established that the increase in well production rates after horizon perforation depends on the depletion level of recoverable oil reserves. It is shown that at the l...
122-126
59
06 Jun, 2026
TECHNICAL SCIENCES
The article investigates the advantages of drying rose hip (Rosa canina) fruits using ultrasonic technology. The results show that ultrasound reduces drying time, decreases energy consumption, and minimizes vitamin C loss by up to 17%. Furthermore, the organol...
103-110
43
06 Jun, 2026
TECHNICAL SCIENCES
This article analyzes the conditions and criteria for selecting the optimal absorbent or the type of combined absorbents for the selective purification of natural gas from acidic components and sulfur-containing compounds, as well as the challenges associated ...
86-94
47
06 Jun, 2026
TECHNICAL SCIENCES
In our country, electricity is supplied primarily via overhead power lines (OPL). Due to their length, these networks experience significant voltage drops. Meanwhile, residential electricity consumption is rapidly increasing. This, in turn, requires the ongoin...
80-85
47
06 Jun, 2026
TECHNICAL SCIENCES
The article examines the properties of the dependence of the efficiency of solar cells in the climatic conditions of the city of Karshi on the concentration of impurities in monocrystalline silicon, which was used in their manufacture and under the influence o...
67-72
55
06 Jun, 2026
TECHNICAL SCIENCES
Abstract. In our republic, garlic cultivation is mainly carried out by manual labor, so the income from it remains at the lowest levels. Because when planting garlic in homesteads and small farms, the process of initially separating them into seeds, that is, d...
62-66
54
06 Jun, 2026
TECHNICAL SCIENCES
Abstract. To date, numerous field and laboratory studies have been conducted worldwide on the movement of bedforms occurring in alluvial channels. Some authors have attempted to generalize this information, but so far they have not been able to achieve complet...
55-61
50
05 Jun, 2026
TECHNICAL SCIENCES
The article analyzes the issues of changing the hydrodynamic parameters during the stoppage of axial pumps, which is one of their unstable operating modes. The stages of the pump stoppage process with high hydrodynamic loads and changes in water flow, pressure...
40-47
94
05 Jun, 2026
TECHNICAL SCIENCES
The limited nature of land resources and the prevention of energy shortages as a global problem require the effective use of renewable energy sources. The drying efficiency of the main environmental factors - solar radiation, outdoor air temperature and humidi...
33-39
99
05 Jun, 2026
TECHNICAL SCIENCES
Abstract. The article substantiates the relevance of preparing a feed mixture at the level of zootechnical demand from mixed feed with coarse and juicy feeds and feed production waste, which is important for increasing livestock productivity today, preparing i...
21-26
112
05 Jun, 2026
GEOLOGICAL AND MINERALOGICAL SCIENCES
The article presents the results of the author's research on the use of resource-saving technologies and technical means for gas production and transportation through pipelines, as well as their purification from foreign impurities. Considering that 75% of all...
7-15
129
05 Jun, 2026
GEOLOGICAL AND MINERALOGICAL SCIENCES
This paper presents a modeling approach for acid treatment of carbonate reservoirs, taking into account the geological structure of the near-wellbore zone. Using real field data from the Matonat and Western Kruk fields, parameters such as the Damkyuler number,...
48-54
59
05 Jun, 2026
GEOLOGICAL AND MINERALOGICAL SCIENCES
In this article, the hydrodynamic characteristics of a Banki (cross - flow) turbine designed for micro - hydropower plants operating under low - head water flow conditions were investigated using digital modeling methods. The main objective of the study is to ...