133-139
861
30 Mar, 2026
TECHNICAL SCIENCES
The article analyzes issues related to improving the operational reliability of centrifugal pumps widely used in the mining industry. It has been established that the primary causes of failures in pumping equipment operating in hydrotransport systems are hydro...
7-14
617
30 Mar, 2026
GEOLOGICAL AND MINERALOGICAL SCIENCES
Using the central part of the Chardzhou stage as an example, the results of zoning the territory by the ratio of structural plans of carbonate and terrigenous deposits are presented, with the identification of 9 types of zones in the paper. Based on the analys...
38-46
611
30 Mar, 2026
TECHNICAL SCIENCES
This article presents theoretical studies aimed at reducing soil compaction caused by the tires of four-wheel tractors used in vegetable cultivation and harvesting under the soil and climatic conditions of our republic. The paper describes the structural desig...
51-57
127
14 Jan, 2026
GEOLOGICAL AND MINERALOGICAL SCIENCES
This study focuses on the analysis of the control system for the roasting process of sulfide-containing products. The physico-chemical characteristics of the process are examined, including temperature regulation, oxygen concentration, and gas flow stability. ...
7-15
130
20 Dec, 2025
GEOLOGICAL AND MINERALOGICAL SCIENCES
Mazkur maqolada quduq atrofi zonasining geologik tuzilishini inobatga olgan holda karbonat kollektorlarga kislotali ishlov berish jarayoni modellashtirilgan. Matonat va G‘arbiy Kruk konlari misolida real dala ma’lumotlari asosida Damkyuler soni, filtratsiya te...
73-79
197
25 Sep, 2025
TECHNICAL SCIENCES
The operation of BelAZ mining dump trucks in environments with high air dust concentration has a significant impact on the technical condition and service life of internal combustion engines (ICE). This study analyzes the interactions of dust particles with co...
43-47
140
07 Sep, 2025
GEOLOGICAL AND MINERALOGICAL SCIENCES
The agrotechnical and energy performance of the ripper plough for non-tillage depends largely on the relative position of the roller and the last working body with an inclined rack. The purpose of the study is to substantiate the longitudinal distance between ...
32-53
91
30 Jun, 2025
GEOLOGICAL AND MINERALOGICAL SCIENCES
The article is devoted to the analysis and demonstration of approaches to the calculation of combined heating and cooling systems using heat pumps and renewable energy sources (RES) under the conditions of Uzbekistan. Calculation results are presented, and the...
7-13
99
30 Jun, 2025
GEOLOGICAL AND MINERALOGICAL SCIENCES
The article describes the results of the study of neotectonic movements of the Surkhandarya depression. New (1: 200,000 scale) maps of the thickness of Neogene-Quaternary deposits, a schematic map of rupture faults active in modern times were compiled. Along w...
32-53
311
18 Jun, 2025
TECHNICAL SCIENCES
The article is devoted to the analysis and demonstration of approaches to the calculation of combined heating and cooling systems using heat pumps and renewable energy sources (RES) under the conditions of Uzbekistan. Calculation results are presented, and the...
7-13
322
18 Jun, 2025
GEOLOGICAL AND MINERALOGICAL SCIENCES
The article describes the results of the study of neotectonic movements of the Surkhandarya depression. New (1: 200,000 scale) maps of the thickness of Neogene - Quaternary deposits, a schematic map of rupture faults active in modern times were compiled. Along...
30-37
129
23 Dec, 2024
GEOLOGICAL AND MINERALOGICAL SCIENCES
Improving the technology for extracting platinum group metals from technogenic waste of the metallurgical industry, including conducting a number of studies in the following priority areas: creating a methodological basis for improving the technology for extra...